User manual
54
Briey pressing the button for the top or bottom half of
the rocker moves the shutters to the top or bottom limit
position. Briey pressing the button for the opposite
direction stops the motor prematurely. Pressing the
relevant rocker button and holding it down moves the
motor in the required direction for as long as the rocker
is activated.
8.2 Teaching-in
Please read this entire section before starting
the teach-in procedure.
HomeMatic components have to be taught in to each
other in order to communicate.
To execute the teach-in procedure, both of the devices
to be connected must be in teach-in mode. To do this,
remove the rocker and briey press the Cong button
(B). The device LED will ash continuously to indicate
that teach-in mode is active.
If no teach-in operations are carried out, teach-in
mode will be exited automatically after 20 seconds. If
other devices are also in teach-in mode, they will be
taught-in.