User manual

36
6.2.2 Conguring newly taught-in devices:
Once you have taught-in your device to the CCU, it will
bemovedtotheinbox.Here,youmustcongurethe
device and its associated channels in order to make
themavailableforoperatingandcongurationtasks.
Give the device a name and assign it to a room. You
can also make individual parameter settings.
Now you can use the „WebUI“ user interface to control
yourdevice,congureit,connectitdirectlytoother
devices, or use it in central control unit programs to
display the data measured. Please refer to the „We-
bUI“operatingmanualformoredetails(youcannd
this in the „Downloads“ area of the website
www.homematic.com).
7 Conditional switching
With the function "Conditional switching", connected
consumers or other HomeMatic devices can be
switcheddependingonadenedcondition.
Example: You have connected your dryer in the cel-
lar with the switching actuator and want to receive an
audio signal that will let you know when the dryer is
nished.Therefore,youcanconnecttheswitchingac-
tuator with a HomeMatic Wireless MP3 Chime via the