User manual

39
1 x long, 1 x
short red
ashing
Duty cycle
reached
please see sec.
"10 Duty cycle"
1 x long, 2 x
short red
ashing
Device defective Please contact
your specialist
dealer.
9 Restore factory settings
The factory settings of the HomeMatic Switch Acutator
with power metering can be restored manually. If you
do this, you will lose all your settings.
Before restoring the factory settings, please
delete the device from the user interface WebUI
rst.
To restore the factory settings, please proceed as
follows:
• Press and hold down the channel button (A ) for at
least four seconds until the device LED will start
ashing.Releasethebuttonagain.
• Press and hold down the channel button (A ) again
for at least four seconds until the device LED will
startashingfast.Releasethebuttonagain.
• The factory settings of the device are now restored.