User manual

BRIGHTER. Dimming occurs by holding the button

pressed.

• If you want to exit conguration mode, press the

teach button again.

If no teaching occurs, teach mode is

automatically ended after 20 seconds. If

another device is in teach mode, this is taught.

If the push button is already taught for a

center and therefore is blocked for direct

training, it can still be put in conguration

mode as described above, the device LED is

illuminated in red for 2 seconds after pressing

an operating button however. Direct teaching

is not possible!

After teaching, in the operation mode simple opera-

ting functions are available. The 2 buttons (on a com-

mon rocker) can be controlled by pressing up or down

( ) shortly. Pressing up ( ) triggers the functions ON,

UP or BRIGHTER, pressing down

( ) triggers the functions OFF, DOWN or DARKER.

Switch actuators and dimmers can then be switched

ON/OFF. Furthermore, dimming occurs by holding the

button pressed and blind actuators move up or down.