User manual
30
31
5 General information on radio
operation
The radio transmission is on a non-exclusive trans-
mission path which means that there is a possibility
of interference occurring.
Other interfering sources can be caused by swit-
ching operations, electrical motors or defective
electrical devices.
The range of transmission within buildings
can greatly deviate from open air distances.
Besides the transmitting power and the recepti-
on characteristics of the receiver, environmental
influences such as humidity in the vicinity and local
structures also play an important role.
Hereby eQ-3 Entwicklung GmbH, declares that
this device conforms with the essential require-
ments and other relevant regulations of Directive
1999/5/EC.
The full declaration of conformity is provided under
www.HomeMatic.com.
6 Installing the door-window
contact
6.1 Scope of delivery
The shutter contact mainly consists of two parts:
• Electronicsunit
• Magnet
• TwobuttoncellbatteriesLR44
The fastening materials and spacers for adapting to
the various window types are also included in the
scope of delivery.