User manual

32
devices are taught-in to the Central Control Unit via the HomeMatic
„WebUI“.
A soon as a component has been taught-in to a Central Control
Unit, it can only be connected to other components via the CCU.
Each component can only be taught-in to one Central Control Unit.
During teach-in, please make sure you maintain a distance of at
least 50 cm between the HomeMatic devices and the Central
Control Unit.
To teach-in your device to the Central Control Unit, proceed as follows:
• Open the „WebUI“ user interface in your browser.
• Click the „Teach-in devices“ button on the right-hand side of the
screen.
• To activate teach-in mode, click „BidCoS-RF teach-in mode“ in the
next window.
• Teach-in mode remains activated for 60 seconds. An information
box shows how much teach-in time remains.
• Meanwhile, please activate the teach-in mode of the motion detec-
tor to teach-in as well.
• Press the teach-in button of the wireless motion detector .
• After a short time, the newly taught-in device will appear in the
inbox of your software interface. The button „Inbox (x new devices)“
indicates how many new devices have been taught-in successfully.
• If required, you can teach-in additional devices by repeating the
steps described above for each device.