Operation Manual

35
The Info LED provides information about error
and alarm messages of the CCU. The transmis-
sion of messages may be delayed by max. 10s.
7 Restore factory settings of the
device
The factory settings of the Homematic Wireless LAN
Gateway can be restored manually. If you do this, you
will lose all your settings.
Before restoring the factory settings, please delete
the device from the user interface WebUI rst.
To restore the factory settings, please proceed as
follows:
• Press the “Reset” button (D) for approx. 6 seconds.
The quickly ashing LED indicates delete mode.
• Release the button.
• Press the button again for approx. 3 seconds until
the LED ashes slowly.
• Release the button again.
• The LED expires after a short time and the factory
settings of the device will be restored.