Operation Manual
22
1 Information about these instructions
Read this manual carefully before starting to use your Homematic
components.
Keep the instructions handy so you can refer to them at a later date.
If you hand over the device to other persons for use, please hand over
the operating manual as well.
Symbols used:
Attention! This indicates a hazard.
Note. This section contains additional important information.
2 Hazard information
The device described is part of a building installation. When
planning and setting up electrical installations, the standards
and guidelines which are applicable in the country in which the
equipment is installed must be complied with.
The device has been designed solely for operation on a
230 V/50 Hz AC supply.
Only qualied electricians (to VDE 0100) are permitted to carry out work
on the 230 V mains. Applicable accident prevention regulations must be
complied with whilst such work is being carried out.
To avoid electric shock, disconnect the mains voltage prior to starting
work on the device (trip the miniature circuit-breaker).
Noncompliance with the installation instructions can cause re or intro-
duce other hazards.
Do not exceed the capacity specied for the device.
If this capacity is exceeded, this could lead to the destruction of the
device, to a re or to an electrical accident.
Disconnect the mains voltage before opening the device. There is a risk
of electric shock if the device is opened with the mains voltage con-
nected.
When connecting to the device terminals, take the permissible cables
and cable cross sections into account.