Installation Guide

page 12

Step 11: Insert railing spindles into each cutout in T-rail making sure

each spindle is tight against bottom of cutout.

Step 10: Make sure angles align

on ends of railings.

Step 13: Lay railing section on the

ground and push together.

Step 12: Attach T-rail to spindles using three 1-1/2” screws in the pre-

drilled holes along edge of T-rail.

Step 14: Attach the straight bottom rail to the spindles repeating

step 13.

Step 15: Repeat steps 8-14 for

the six remaining railing sections.