Installation Guide

Note: There are 2 L strips for both

sides of door, and 6 T strips for

remaining posts.

Step 9: Install trim strips onto center of post and fasten with 2-1/2”

screws through pre-drilled holes.

Do not countersink screws too deep, install just beyond surface.

Step 10: Install filler strip above door and fasten with 2-1/2” screws as shown.

Step 11: Install plastic door jamb strip and fasten with 2-1/2” screws as shown (flush with outside of post).

L-Strip

T-Strip

If you are installing screens for a wood gazebo, please see the instructions on page 5 for

steps 10 & 11.

Screen Door Installation