Installation Guide

page 14

Step 25: Repeat steps 24-25 for

opposite side.

Step 27: Assemble one door section without bottom railing as shown.

Step 28: Stand up one post at

door way opening keeping the

angled cut sloping downward to-

ward outside of the gazebo.

Step 23: Use the spacer blocks to

align the brace section.

Step 24: Attach the post trim to the top brace section using four 2-

1/2” screws in the pre-drilled holes as shown.

Make sure short point at top of

post trim is against the ground.

Section is complete Step 26: Repeat steps 16-25 for

six remaining sections.

Step 29: Position doorway sec-

tion at appropriate location for

your site.