Installation Guide

A: Locate the door header boards. B: Interlock boards together and align flush at end.
C: Insert boards above door header and attach with three 2-1/2” screws.
D: Locate the door filler strips. E: Insert the top filler strip as shown and attach using three 2-1/2”
screws as shown.
© Suncast Corporation Page 05
Additional Instructions for a wood gazebo
Note: The following instructions replace steps 10 & 11 on page 2.
F: Align the side filler strips flush with edge of post trim and attach to post using five trim nails per strip.