Instructions / Assembly

page 28

Gable Overhang Assembly & Installation

Step 72: Assemble gable overhang keeping OSB flush at bottom and edges. Fasten OSB to rafters

using 2-1/4” nails spaced 8” apart.

Step 71: Remove gable overhang

pieces from package.

White plywood goes on bottom,

OSB goes on top.

Step 73: Gable overhang ready

for installation.

Step 74a: Install front gable over-

hang...cont.

Step 74b: Align rafter ends flush.

See step 72 below...