Installation Guide

Before You Begin
• Consult your local authorities for any permits required to construct pergola.
Prior to the construction of your pergola, check with the local building code official to review any required
permits or building limitations.
• COMPLETE SITE PREPARATION AND FOUNDATION CONSTRUCTION BEFORE UNPACKING ALL PARTS.
A level and sturdy foundation is required before pergola construction can begin.
• Read instructions thoroughly prior to assembly.
This kit contains parts that can be damaged if assembled incorrectly or in the wrong sequence.
• Please follow instructions.
If you have questions or concerns with this product DO NOT return to store.
Assembly questions? Missing parts? Call 866-768-8465.
• Assistance is required.
Due to the size of the parts, at least two people are required to handle, fit and secure pergola components.
• Foundation mounting hardware varies with each application and is not included in this kit.
Read manual first and contact your local building supply retailer for recommendations for your application.
CAUTION
• Pergola not intended for use in extreme weather conditions.
• Do not stand, sit, or store items top of pergola.
• Handle carefully in extreme temperatures.
• Repair or replace broken parts immediately. Call 1-866-768-8465 for replacement parts.
• Suncast is not responsible for damage caused by weather or misuse.
• At regular intervals inspect your pergola to make sure that assembly integrity has been maintained.
• Periodically check that the location you have chosen to set your pergola is still level.
• Avoid excess heat from any auxiliary source.
• Any additional holes drilled into parts could cause unsafe conditions.
• Follow manufacturer safety instructions when using ladder.
• Do not anchor to paver bricks. Foundation must be a solid surface.
• Exercise caution using a lawn mower, edge trimmer or other yard equipment near pergola.
TOOLS REQUIRED
• Ladder
• Tape Measure
• Hammer
• Level
• Screw Gun