Instructions / Assembly

page 12

Step 7: Remove bottom railing box from the skid, place in close prox-

imity to assembly site, and remove lid.

Step 6: Set all posts aside.

Step 5: Cut open the posts by

running a knife in between the

posts.

Warning: Be very cautious to

not cut into the posts. This will

damage them permanently.

There are two differ-

ent post

configurations

Standard post with

four angled railing

inserts (6)

Door post with only

two railing

inserts (2)

Step 8: Locate and open the box containing the railing spindles.Each railing section consists of a

top T-rail and bottom straight rail.