Installation Guide

page 17

Step 24: Center posts on floor splice, space an equal distance from edge of floor, and fasten into floor

using 2-1/2” white screws.

Note: If you did not purchase the optional floor kit, space posts equally and attach to the founda-

tion using appropriate fasteners. All posts should be positioned an equal distance from one cor-

ner of the gazebo to the opposite corner.

Step 25: Remove rafter box from skid and unpack components.

Step 27: Prepare roof bolts by putting a nut and washer on one end

of the bolt as shown.

Step 26: Place a step ladder in

the center of the gazebo.

Rafter Installation