Instructions / Assembly

23.
22.
21.
The top plate is composed of 2 layers. The
notches on the lower layer face down to
receive the wall studs. The notches on
the upper layer face up to receive the roof
rafters.
Fasten the lower layer to the wall studs be-
fore adding the upper layer.
NOTE: Make sure door and window open-
ings are square before proceeding (opening
is square when diagonal measurements are
equal).
Fasten with 3” nails.
V G B A M
© S C
P 
24.
Locate and lay out siding as shown. Use
three 4’ pieces, starting from the right side
of the wall, with an overlap on the far right
hand side.