Instructions / Assembly

25.
28.
27.
26.
First piece of siding on right hand side of the
wall is to be installed with the edge of the
siding overlap extending 1/2” past the end of
the wall framing, as shown.
Line up top of siding with bottom edge of top
plate, as shown.
Add a 2’ piece, with overlap on the right
side. Make sure all three joints between
siding pieces have one piece with an over-
lap, and the adjacent piece has an underlap.
V G B A M
© S C
P 
Underlap portion of rst 4-foot piece of sid-
ing should center on a wall stud as shown.
This will also help ensure that the wall will
be square/plumb when erected.
There will be 2-1/2” of overhang at bottom
edge of wall.