Instructions / Assembly

Wall & Floor Assembly

page 4

Step 7: Set back wall panel as shown, aligning ends of wall flush

with ends of floor.

Note: Make sure wall panel is plumb up and down.

Step 7: Set first side wall repeating previous steps.

Note: Side walls are interchangeable, make sure to

place side door panel where desired.

Step 8: Fasten side wall into back wall using

2-1/2” fasteners as shown.

Note: Make sure wall panel is plumb up

and down.

Step 8: Fasten wall to floor

as shown using 2-1/2” nails

or screws. Fasteners should

be spaced approximately 12”

apart.

Step 5:Set floor on leveled

site. If needed, level site

with a bed of crushed stone

or gravel. It is very impor-

tant for site to be level.

Step 4: Assemble floor sections by aligning marks on floor, and mak-

ing sure floor edges are precisely flush. Fasten sections together using

heavy duty 3” screws spaced 12” apart.