Instructions / Assembly

Step 9: Push walls tightly together, nail corners and along bottom of siding around perimeter of build-
ing, using, 1¾" galvanized nails as shown.
Note: Keep nails within 1-1/2” of edges of corners so nail heads are covered by corner trim
Roof Assembly
Step 10: Install gable end rafters (end rafters have only one rafter gusset) keeping rafter gusset
towards inside of playhouse. Align edge of rafter flush with edge of top wall plate and fasten using 2-
1/2” fasteners.
Step 11: Align inside of rafter flush with marks, keep point even with the outside edge of 2x6 top plate.
Using 3" nails, toenail rafter into the top of side wall. After nailing front side, repeat on back wall.
Step 12: Caulk end gables as shown using clear silicone caulk and install end gable siding sections as
shown. Note: Align siding grooves .