Instructions / Assembly

page 7

Step 20: Align gable end rafters with end of wall plate and top of OSB roof sheeting, as shown, and fas-

ten to building using 2-1/2” screws or nails.

Trim, Shutters, & Flower Box Installation

Step 21: Gable end rafters

complete, repeat steps on

opposite gable end.

Step 22: Install fascia trim aligning flush at both ends with end raf-

ters and against bottom of roof sheathing. Fasten with 1-1/2” galva-

nized trim nails.

Step 19: Install window shutters, top window trim, and flower boxes as shown.