Use and Care Guide

FINISH MAX

SUPER SPRAYER (C800971) ENGLISH

FAST START QUICK REFERENCE GUIDE

Cleaning Instructions

Spraying Instructions

This is only a quick reference.

Read the entire instruction manual prior to using the product.

SKIN INJECTION HAZARD RISK OF EXPLOSION OR FIRE HAZARDOUS VAPORS

Read all warnings and safety instructions in the owner’s manual before use.

5. Plug sprayer into outlet. 6. Adjust spray pattern to horizontal,

vertical, or cone. (See page 7.)

7. (–) Turn counter clockwise for

less flow and finer spray pattern.

(+) Turn clockwise for more flow

and larger spray pattern.

8. Spray surface, keeping sprayer

level. Use a sweeping and

overlapping motion.

5 6 7 8

HAZARDOUS VAPORS

1. Thin material as necessary.

(Seepage 5.) Remove and fill

container with material. Use a

filter to strain material if it is old.

2. Determine size of tip and needle

you will need by referring to

chart on page 5.

3. Insert the pick-up tube into the

cylinder housing. See Page 6,

Figure B to determine orientation

of pick-up tube.

4. Attach container to sprayer.

1 2 3 4

1. Unplug sprayer, remove

container, and empty contents.

2. Fill sprayer with cleaning

solution, plug in sprayer, and

operate trigger until solution

comes through nozzle. Do not

submerge in liquid.

3. Remove parts. Clean and dry

thoroughly according to Step

Two of the Clean Up instructions.

(See page 8.)

1 2 3

See manual for grounding

instructions