Installation Guide

Fig. 1
Fig. 2
Fig. 4
Fig. 5
Side View
a.
Fig. 6
INSTALLATION INSTRUCTIONS
TOWEL BAR, TOWEL RING, ROBE HOOK, TISSUE HOLDER
Top View
Push
C
E
G
C
H
D
A
B
A
C
E
F
Front View
TOOLS REQUIRED FOR INSTALLATION
AND ASSEMBLY
(not included):
Installation
WARNING: Drywall anchors are for drywall only.
Use Tile anchors for tile
Pencil Drill
Phillips
Screwdriver
Hammer
1. Assemble and hold the product up against desired position on wall
and mark the back plates of the end pieces with a pencil (Fig 1)
Make sure you use a level and measuring tape for accuracy.
2. Place mounting plate (C) in outline and mark screw holes.
3. Drill holes into the wall where drywall anchors will be inserted.
4. Insert drywall anchors.
5. Place the mounting plates over the drywall anchors and install screws.
(Hand tighten only - Do not overtighten)
6. Place the product end piece over the mounting plate and tighten with
the allen wrench.
7. Place the other end piece and rod onto the other mounting plate and
secure with allen wrench.
CLEANING:
Use a soft cloth to clean. Never use harsh solvents to clean.
Fig. 7
C
H
D
A
www.HomeSelects.com - [e-mail]