Assembly Instructions Instrucciones de Ensamblaje 120mns SAVE THESE INSTRUCTIONS GUARDE ESTAS INSTRUCCIONES Do Not Return! No Vuelvas! 2-Door/1-Drawer Cabinet Gabinete de 2 puertas / 1 cajón C1910147 Email or call customer service for help first. Envie correo electrónico o llame al servicio para obtener ayuda primero. 1-214-758-1098/Toll free: 1-883-907-1099 Monday-Friday 9am - 4pm CST customer@legacyhfd.
Helpful advice Consejos útiles 1. Follow the assembly instructions carefully. 2. Check to ensure all parts, fasteners and hardware are present. 3. To prevent product damage, assemble the furniture on top of the carton. 4. Clean surface of furniture with a duster or damp cloth only. Do not use abrasive cleaners. 1. Siga a tentamente las instrucciones de montaje. 2. Asegúrese de que la caja contiene todas las piezas, sujeciones y materiales. 3. Monte el mueble sobre la caja para evitar dañarlo. 4.
Ha Harrdwar Hardware/Lista de materiales ITEM IMAGE DESCRIPTION DESCRIPCIÓN QUANTITY A Wood dowel Perno madera 16 B Cam bolt (large) Perno metálico (Grande) 19 C Cam lock (large) Bloqueo metálico (Grande) 19 D Shelf support Perno 8 E Sticker Pegatina 6 F Φ3×12 mm Screw Φ3×12 mm Tornillo 24 02
Har Hardware/Lista de materiales ITEM 03 IMAGE DESCRIPTION DESCRIPCIÓN QUANTITY G Hinge Bisagra 4 H Φ4×14 mm Screw Φ4×14 mm Tornillo 24 I Wall anchor Expansión de plástico 2 J Handle Tirador 4 K M4×24 mm Bolt M4×24 mm Tornillo 2 L Φ4×50 mm Screw Φ4×50 mm Tornillo 2 M Door stop Tope de puerta 1 N M4×12 mm Bolt M4×12 mm Tornillo 2 O Cam bolt (small) Perno metálico (Pequeño) 1 P Cam lock (small) Bloqueo metálico (Pequeño) 1 Q Glide Planeador 1 R Φ3×12 mm Scre
Har Hardware/Lista de materiales ITEM IMAGE DESCRIPTION DESCRIPCIÓN QUANTITY S Drawer connector Conector de plástico 2 T Φ4.7×12.5 mm Screw Φ4.7×12.5 mm Tornillo 4 U Φ3.5×12 mm Screw Φ3.5×12 mm Tornillo 4 V Φ3.8×35 mm Screw Φ3.8×35 mm Tornillo 5 Note/Rema que/Nota r El uso del tornillo incorrecto puede provocar daños al producto. Antes de iniciar la operación de Using the wrong screw will cause damage. Before you begin assembly check to ensure all parts are present.
WARNING This product can expose you to chemicals including Formaldehyde, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture ADVERTENCIA Este producto puede exponerlo a sustancias quím icas, incluyendo el formaldehído, el cual es conocido en el estado de California como causante de cáncer, defectos de nacimiento u otros daños reproductivos. Para obtener más información vaya a www.P65Warnings.ca.
Necessary tools/Herramientas necesarias Glue Glue not enclosed (We recommend to apply some glue into holes before inserting wood dowels.) Colle non fournie (Nous vous recommandons d’appliquer quelques gouttes de colle dans les trous avant notd’y included ( Weles recommend apply some glue into holes before inserting wood dowels .) introduire chevilles detobois.) Cola, nomadera.) incluida (Le recomendamos colocarunas gotas de cola en los orificios antes de insertar las clavijas de madera.
Attention: In order to help your assembly, do not lock the screw tightly until you have assembled all the other parts. Atención: Con el fin de facilitar su montaje, no apretar el tornillo firmemente hasta que haya ensamblad o todas las otras partes. Step 1/Paso 1 Insert 6 wood dowels (A) into the holes on the edge of bottom (6). Inserte 6 Pernos maderas (A) en el Tablero inferior (6). Ax6 A Step 2/Paso 2 Insert 3 cam bolts (B) into front rail (7). Inserte 3 Pernos metálicos (B) en la Barra frontal (7).
Step 3/Paso 3 Insert 3 cam locks (C) into bottom (6) to connect front rail (7). Conecte el Tablero inferior (6) al Barra frontal (7) con 3 Bloqueos metálicos (C). Cx3 Step 4/Paso 4 Insert 2 wood dowels (A) into the holes on the edge of back rail (8). Inserte 2 Pernos maderas (A) en la Barra posterior (8).
Step 5/Paso 5 Insert 4 wood dowels (A) into the holes on the edge of fixed shelf (5). Inserte 4 Pernos maderas (A) en el Estante fijo (5). Ax4 A Step 6/Paso 6 Insert 5 cam bolts (B) into gable left (2). Insert glide (Q) into gable left (2) with 3 screws (R). Inserte 5 Pernos metálicos (B) en el Tablero izquierdo (2) Fije un Planeador (Q) con 3 Tornillos (R).
Step 7/Paso 7 Connect back rail (8) and gable left (2) with 1 cam lock (C). Connect fixed shelf (5), bottom (6) and gable left (2) with 5 cam locks (C). Conecte el el Estante fijo(5), la Barra posterior (8), el Tablero inferior (6) al Tablero izquierdo (2) con 5 Bloqueos metálicos (C). Cx5 C Step 8/Paso 8 Insert 5 cam bolts (B) into gable right (3). Insert glide (Q) into gable right (3) with 3 screws (R).
Step 9/Paso 9 Attach gable right (3) to the assembly with 5 cam locks (C). Conecte el Tablero derecho (3) al ensamblaje con 5 Bloqueos metálicos (C). Cx5 C Step 10/Paso 10 Insert 6 cam bolts (B) into top (1). Hammer 1 door stop (M) into the holes on the top (1). Inserte 6 Pernos metálicos (B) en el Plane superior (1), inserte un tope de puerta (M).
Step 11/Paso 11 Insert top (1) into the stand assembly with 6 cam locks (C). Conecte el Panel superior (1) al ensamblaje con 6 Bloqueos metálicos (C). Cx6 C Step 12 /Paso 12 Insert back panel (9) into the stand assembly with 24 screws (F). Conecte el Tablero posterior (9) al ensamblaje con 24 Tornillos (F).
Step 13/Paso 13 x2 Insert 2 hinges (G) into the door panel (10) with 4 screws (H). Align handle (J) with the hole on the door panel (10), secure with 1 screw (K). Repeat this step for another door. Fije 2 Bisagras (G) en la puerta (10) con 4 Tornillos (H), Fije el Tirador (J) con 1 Tornillo (K), Repite este paso. Gx4 H Hx8 K G Jx2 J Kx2 Step 14 /Paso 14 Insert hinges (G) on the door panel (10) into the stand assembly with 16 screws (H). Fije las Bisagras (G) en el ensamblaje con 16 Tornillos (H).
Step 15/Paso 15 Insert 8 shelf supports (D) into the holes on the gable (2) and gable right (3). Then put 2 adjustable shelves (4) into the stand assembly. Inserte 8 Pernos (D) y 2 Estantes (4). Dx8 D Step 16 /Paso 16 Insert 2 glides (Q) into drawer side left (11) and drawer side right (12) with 2 screws (R) . Fije los Planeadores (Q) en el Tablero izquierdo de cajón (11) e Tablero derecho de cajón (12) con 4 Tornillos (R).
Step 17/Paso 17 Insert 2 drawer connectors (S) into drawer side left (11) and drawer side right (12) with 4 screws (U). Connect drawer back (13) and drawer side left (11), drawer side right (12) with 5 screws (V). Combine drawer back (13) wirth drawer support rail (14) with 1 screws (V).
Step 19/Paso 19 Attach drawer front (16) to the inner drawer with 4 screws (T) and 1 cam lock (P). Fije el Tablero frontal de cajón (16) en el ensamblaje con 4 Tornillos (T) y un Bloqueo metálico (P). Px1 Tx4 T P Step 20/Paso 20 Put the drawer into the cabinet. Inserte el cajón.
Step 21/Paso 21 Insert 2 wall anchors (I) into the holes on the wall. Insert 2 screws (L) into back rail (8) to secure the product to the wall. Perfore 2 agujeros en la pared,Golpee 2 Expansiones de plástico (I) en los agujeros de la pared, bloquee la Barra posterior (8) al pared con 2 Tornillos (L). Ix2 Lx2 I WARNING Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over: -Place heaviest items in the lowest rack.
Step 22/Paso 22 Cover visible cam lock holes on gable left (2) and gable right (3) and screw holes on back rail (8) with 6 stickers (E). Utilice 6 Pegatinas (E) para cubrar los agujeros de Table izquierdo (2), el Tablero derecho (3) y la Barra posterior (8).
Maximum weight capacities/Capacidades de carga máxima 22.7 kg 50 lbs. 13.6 kg 30 lbs. 13.6 kg 30 lbs. 13.6 kg 30 lbs. 5 kg 11 lbs. WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. －This product is intended to hold maximum weight indicated. Exceeding the maximum weight will result in instability and may cause serious injury.
1 YEAR WARRANTY BASIC WARRANTY: Homestar® furniture is warranted by Homestar Corporation (Homestar) to the original purchaser for a period of one year from the date of purchase, subject to the following conditions and limitations. 1. Install and operate this item in accordance with the Installation and operating instructions provided with the product at all times. Any alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.
