Use and Care Manual

10
Step 7/Paso 7
Step 8/Paso 8
Insert 2 cam bolts (B) into the divider (4). Align 1 left glide (E) with the holes on the divider (4), then secure with 3
screws (D). Make sure the rst hole you align is correct.
Inserte 2 Pernos metálicos (grandes) (B) en fuera del Tablero vertical (4), Inserte el Planeador izquierdo(E) en el
Tablero vertical (4) con 3 Tornillos (D) Tenga en cuenta que la posición del primer agujero sea correcto.
Insert 2 wood dowels (A) into the edge of the right bottom (6). Insert 2 brackets (H) into the right bottom (6) with 2
screws (I).
Inserte 2 Pernos maderas (A) en el Marco derecho inferior (6), y inserte 2 Chapas (H) con 2 Tornillos.
4
B
D
D
E
B x 2
D x 3
E x 1
I
A
H
A x 2
H x 2
I x 2
6