Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsFurnitureBlake 68 in. Beige Modern Polyester 2-Seat Sofa

Part List

2000-301-FB02

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Sofa

Base

1 pc.

Back

1 pc.

styles Customer Service: www.homestylesfurniture.com,home

servicedesk@homestylesfurniture.com,

888-680-7460

For assembly see instructions in carton -FB02.2000-302

Back Cushion

2 pcs.

Summary of content (5 pages)

PAGE 1
2000-301-FB02 Sofa IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Base 1 pc. E. Back 1 pc. G. Back Cushion 2 pcs. For assembly see instructions in carton 2000-302-FB02. homestyles Customer Service: www.homestylesfurniture.
PAGE 2
000-302-FB02 Sofa IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List B. Foot 5 pcs. C. Side 1 pc. D. Side 1 pc. F. Seat Cushion 2 pcs. Carton 2000-301-FB02 is also needed for assembly. homestyles Customer Service: www.homestylesfurniture.
PAGE 3
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. C D A Metal Slot STEP 1 Attach Base (A) to Side (C) by sliding metal slots into position. (See Figure 1) Attach Side (D) to unit by sliding metal slots into position. Figure 1 B B B B STEP 2 B Attach Feet (B) to unit, then tighten.
PAGE 4
Assembly Instructions 3/3 Back Cover E Metal Slot Latch STEP 3 Attach Back (E) to unit by sliding metal slots into position. Lock Back (E) in position with latches. (See Figure 2) Attach back cover to back of unit. (See Figure 3) Figure 2 G F Figure 3 G F STEP 4 Place Seat Cushions (F) into position. Place Back Cushions (G) into position.
PAGE 5
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.