Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsFurnitureWhite and Stainless Steel Buffet with Storage

88 5001 004

Buffet

Home Styles Consumer Assistance : www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure

a completed product as it was designed.

Tools required for assembly : Phillips screwdriver, Drill, 3/8” Drill Bit Level,

(Please refer to the last page of these

instructions for drawer assembly steps.)

Side Panel

1 Pc.

Side Panel

1 Pc.

Front Stretcher

1 Pc.

Front Stretcher

1 Pc.

Back Stretcher

1 Pc.

Base

1 Pc.

Front Upright

1 Pc.

Divider

1 Pc.

Back Upright

1 Pc.

Leg

2 Pcs.

Back Stretcher

1 Pc.

Back Panel

2 Pcs.

Shelf

1 Pc.

Drawer

M6x35

Head Cap Bolt

4 Pcs. (+1 extra)

Cam Lock

10 Pcs. (+2 extra)

Cam Lock Screw

10 Pcs. (+1 extra)

M3.5x13

Wood Screw (short)

for Base Drawer

8 Pcs. (+1 extra)

M3.5x16

Wood Screw

for Back Panel

8 Pcs. (+1 extra)

M4x25

Machine Screw

6 Pcs.

Small Hex Wrench

1 Pc.

M6x50

Head Cap Bolt (long)

4 Pcs. (+1 extra)

Cross Dowel

4 Pcs. (+1 extra)

M3.5x25

Wood Screw (long)

for Side Drawer

16 Pcs. (+1 extra)

Adjustable Pin

4 Pcs. (+2 extra)

Pull Handle

2 Pcs.

Knob

2 Pcs.

Hex Wrench

1 pc.

2 Pcs.

Door

1 Pc.

Door

1 Pc.

Summary of content (6 pages)

PAGE 1
88 5001 004 Buffet IMPORTANT NOTE. Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List C. Front Stretcher 1 Pc. E. Front Upright 1 Pc. D. Front Stretcher 1 Pc. A. Side Panel 1 Pc. G. Divider 1 Pc. F.
PAGE 2
Assembly Instructions 2/5 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten up all the bolts until each part is properly assembled. * Use a soft cloth between these parts and the floor. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. Cam Lock Screw of Side Panels (A) and (B) and then tighten. B F A J J H Back Stretcher (I). I Slide Back Panels (J) into place.
PAGE 3
Assembly Instructions 3/5 Cross Dowel L Cross Dowels and Head Cap Bolts (long). Attach Legs (L) to Base (K) with Head Cap Bolts. Figure 3 Cam Lock Screw K Head Cap Bolt L Head Cap Bolt (long) Cam Lock Attach Top to unit with Cam Locks. Insert Adjustable Pins into side panels at the desired level. P P N Place Shelf (M) into position. O Attach Knobs to Door (N) and (O) with Machine Screws.
PAGE 4
Assembly Instructions 4/5 Attention! To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly! Wall Screw Anchor in wall 3/8” wall hole Bracket on wall Wood Screw Place unit at desired location. Drill a 3/8” hole in wall at the appropriate location. Insert Anchor into the wall hole and attach Bracket with Wall Screw. Attach Bracket at pre-drilled hole at top of unit with Wood Screw.
PAGE 5
Assembly Instructions 5/5 Drawer P3 P1 P2 P4 screwdriver and long Wood Screws (4X), tighten halfway. Figure 1 Attach P2 to P3 and P4 using long Wood P1 P3 push P5 all the way forward so it meets P1. (See Figure 2) P5 P1 P3 P2 P4 Figure 2 P5 holes in P5, tighten screws. P2 P4 Figure 3 (See Figure 4) Figure 4 Tighten all screws used in drawer assembly. Part List P1. Front Part 2 Pcs. P2. Back Part 2 Pcs. P3. Side Part 2 Pcs. P4. Side Part 2 Pcs. P5. Base Part 2 Pcs.
PAGE 6
88 5001 102 Stainless Steel Top IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List Q. Top 1 pc. Care Instructions This stainless steel top is made from high grade stainless steel on a strong wood product base construction.