Instructions / Assembly

Cam Lock
Machine Screw
Head Cap Bolt
Assembly Instructions 6/7
Figure 7
E
R
O
O
O
N
STEP 9
Insert Adjustable Pins into middle panel and
side panels at the desired level. (See Figure 5)
Slide Shelves (O) into position.
Attach Door (N) to unit by sliding door hinges
into side panel hinges. (See Figure 6)
Attach Knob to Door (N) with Machine Screw.
(See Figure 7)
Attach unit from Step 2 to unit with Cam Locks.
Attach Glass Holder (E) to unit with
Head Cap Bolts and Flat Washers.
Slide Drawers (R) into position.
Level unit by adjusting the adjustable
levelers on bottom of unit. (See Figure 8)
Note: Unit must be level to work properly.
Figure 6
Figure 8
Figure 5
Knob
Adjustable Pin
Flat Washer