Use and Care Manual

Assembly Instructions 2/8
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into
pre-drilled holes in Top (A),
Sub Top (B), Front Panels (H),
(I), Side Panel (K), Middle Panel (L)
and Base (M), then tighten.
(See Figure 1)
Note: Insert Cam Lock Screws into
Sub Top (B) in the holes exactly
as shown.
Attach Magnet to Middle Panel (L)
with Wood Screws into
pre-drilled holes. (See Figure 2)
Figure 2
Do put Cam Lock Screwsnot
in these holes.
Wood Screw
Magnet
H
A
B
M
H
I
K
L
Figure 1
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Hex Wrench as the bolts may need to be tightened in the future.