Use and Care Manual

Assembly Instructions 2/6
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Make sure unit is level before tightening these screws.
 The unit must be level to work properly. Use the included adjustable levelers to level.
Figure 1
STEP 1
Insert Cam Lock Screws into
pre-drilled holes in Top (A),
Side Panels (B), (C), Middle Panel (G)
and Base (H), then tighten.
(See Figure 1)
A
B
C
G
H
Cam Lock Screw
Cam Lock Screw
Cam Lock Screw
Cam Lock Screw