Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsCartsNantucket Black Kitchen Island with Granite Top

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure

a completed product as it was designed.

88 5033 942

Kitchen Island

Side Panel

1 pc.

Side Panel

1 pc.

Back Panel

2 pcs.

Shelf

4 pcs.

Shelf

1 pc.

Base

1 pc.

Door

1 pc.

Door

1 pc.

For assembly also need carton 88 5033 941

M6x30

Head Cap Bolt

26 pcs. (+1 extra)

Cam Lock

16 pcs.(+2 extra)

Cam Lock Screw

16 pcs.(+1 extra)

Machine Screw

6 pcs.

Adjustable Pin

20 pcs. (+1 extra)

Small

Hex Wrench

1 pc.

Knob

2 pcs.

M3.5x16

Wood Screw (short)

for Drawer Base Part

6 pcs. (+1 extra)

M3.5x25

Wood Screw (long)

for Drawer Side Part

8 pcs. (+1 extra)

Pull Handle

2 pcs.

Hardware List

Plinth

2 pcs.

H2.

Front Rail

1 pc.

M4x16

Wood Screw

for Hinge

27 pcs. (+2 extra)

Tools recommended for assembly : Level

Home Styles Consumer Assistance : www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Tools required for assembly : Phillips screwdriver

Hex Wrench

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Stretcher

1 pc.

H1.

Front Rail

1 pc.

Back Stretcher

2 pcs.

Leg Support

1 pc.

Plinth

2 pcs.

Drawer

1 pc.

Side Panel

1 pc.

Back Support

1 pc.

Side Panel

1 pc.

Back Support

1 pc.

Summary of content (8 pages)

PAGE 1
88 5033 942 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List H1. Front Rail 1 pc. H2. Front Rail 1 pc. B. Side Panel 1 pc. C. Side Panel 1 pc. D. Side Panel 1 pc. E. Side Panel 1 pc.
PAGE 2
Assembly Instructions 2/6 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. STEP 1 Wood Screw A1 Attach Top (A1) to Top (A2) with Wood Screws. Put Cam Lock Screws into the pre-drilled holes of Top (A1), Side Panel (D), (E), (F), (G) and tighten.
PAGE 3
Assembly Instructions 3/6 STEP 2 D Attach Side Panel (B) to Base (P) with Head Cap Bolts. B Attach Side Panels (D) and (E) to Base (P) with Head Cap Bolts. E P Head Cap Bolt H2 H1 STEP 3 Attach Front Rail (H1) and Front Rail (H2) to unit using Cam Locks. I J K K Attach Back Stretcher (I) to unit using Cam Locks. Slide Back Panel (K) into Place. I Attach Stretcher (J) to unit then slide Back Panel (K) into place.
PAGE 4
Assembly Instructions 4/6 Cam Lock F STEP 4 P Attach Side Panel (C) to Base (P) with Head Cap Bolts. G C Attach Side Panels (F) and (G) to unit with Head Cap Bolts. Head Cap Bolt S Q R P Head Cap Bolt Q S STEP 5 Attach Plinths (Q) to Base (P) with Head Cap Bolts. Attach Plinths (S) and Leg Support (R) to unit with Head Cap Bolts.
PAGE 5
Assembly Instructions 5/6 Wood Screw STEP 6 O N Attach Back Support (N) and (O) to unit with Wood Screws into pre-drilled holes. Cam Lock A L Figure 1 V L M L T U Figure 2 L STEP 7 Place Top (A) onto unit with Cam Locks. Adjustable Pin Attach Doors (T) and (U) by sliding the door lift hinges into the side panels lift hinges. (See Figure 1) Attach Knobs to Doors (T) and (U) with Machine Screws.
PAGE 6
Assembly Instructions 6/6 Drawer V1 V3 (Figure 1) STEP 1 Attach V1 to V3 and V4, using a Phillips screwdriver and long wood screws (4X), tighten halfway. V2 V4 Attach V2 to V3 and V4 using long wood screws (4X), tighten halfway. (See Figure 1) MAKE SURE ROLLER IS ON THE BACK STEP 2 Slide V5 into the grooves in V3 and V4. Be sure to push V5 all the way forward to it meets V1.
PAGE 7
88 5033 941 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A2. Top 1 pc. A1. Top 1 pc. For assembly see instructions in carton 88 5033 942 Home Styles Consumer Assistance: www.
PAGE 8
HOW TO UNPACK THE GRANITE TOP IMPORTANT * Please follow these step to unpack the granite top. STEP 1 Wood Crate Open carton. Remove wood crate and place it on the floor. Wood Frame Wood Frame STEP 2 Use a hammer to knock out the wood framing. (see Figure 1) NOTE : BE CAREFUL AND DO NOT HIT THE GRANITE TOP WITH THE HAMMER. Wood Frame Wood Frame Wood Frame Support Foam Hammer (Figure 1) Granite Top STEP 3 Foam Foam Remove wood frame supports and foam.