Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsDressersBarnside Metro 6-Drawer Driftwood Basket Chest of Drawers

Home Styles Consumer Assistance : www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

Part List

Tools required for assembly : Level

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure

a completed product as it was designed.

IMPORTANT NOTE

88 5053 41

Chest

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

M6x10

Head Cap Bolt

for Basket

48 pcs. (+1 extra)

Spring Washer

28 pcs. (+1 extra)

Flat Washer

28 pcs. (+1 extra)

Top

1 pc.

Shelf

2 pcs.

Shelf

1 pc.

Side Frame

2 pcs.

Middle Frame

3 pcs.

Basket

6 pcs.

M6x16

Head Cap Bolt (short)

16 pcs. (+1 extra)

M6x38

Head Cap Bolt

8 pcs. (+1 extra)

M6x50

Head Cap Bolt (long)

4 pcs. (+1 extra)

(Please refer to the last page of these

instructions for basket assembly steps.)

Summary of content (5 pages)

PAGE 1
88 5053 41 Chest IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 pc. E. Middle Frame 3 pcs. B. Shelf 2 pcs. D. Side Frame 2 pcs. F. Basket 6 pcs. C. Shelf 1 pc.
PAGE 2
Assembly Instructions 2/5 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten all the Head Cap Bolts until each part is properly assembled. * Use a soft cloth between these parts and the floor. * After assembly, item must be level to work properly. Use the included adjustable levelers to level.
PAGE 3
Assembly Instructions 3/5 F F F F F F STEP 3 Turn the unit to its’ upright position. Slide Baskets (F) into position. To lever the unit, adjust the adjustable levelers on the bottom of unit.
PAGE 4
Assembly Instructions 4/5 Attention! To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly! Wall Screw Anchor in wall 3/8” wall hole Bracket on wall Wood Screw Place unit at desired location. Drill a 3/8” hole in wall at the appropriate location. Insert Anchor into the wall hole and attach Bracket with Wall Screw. Attach Bracket at pre-drilled hole at top of unit with Wood Screw.
PAGE 5
Assembly Instructions 5/5 Basket (F) F3 STEP 1 Attach Basket Fronts (F3) to Basket Bottom (F1) with clips. (See Figure 1) F1 F3 Figure 1 F2 F2 Figure 2 STEP 2 Head Cap Bolt for Basket Attach Basket Sides (F2) to unit with clips and Head Cap Bolts for Basket. (See Figure 2) Part List F1. Basket Bottom 6 pcs. F2. Basket Side 12 pcs. F3. Basket Front 12 pcs.