Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsFurnitureAmericana Black Kitchen Island With Storage

Tools recommended for assembly : Level

Home Styles Consumer Assistance : www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

Part List

IMPORTANT NOTE

Tools required for assembly : Phillips screwdriver

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure

a completed product as it was designed.

Top

1 pc.

Foot

4 pcs.

Hex Wrench

1 pc.

M6x35

Head Cap Bolt

16 pcs. (+1 extra)

Cam Lock

4 pcs.(+2 extra)

Cam Lock Screw

4 pcs.(+1 extra)

M4x25

Machine Screw

8 pcs.

Adjustable Pin

4 pcs. (+2 extra)

Small

Hex Wrench

1 pc.

M6x50

Head Cap Bolt (long)

4 pcs. (+1 extra)

Spring Washer

4 pcs.(+1 extra)

Flat Washer

4 pcs.(+1 extra)

Pull Handle

8 pcs.

88 5082 941

Kitchen Island

For assembly see instructions in carton 88 5082 942

Summary of content (5 pages)

PAGE 1
88 5082 941 Kitchen Island IMPORTANT NOTE. Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 pc. F. Foot 4 pcs. Hardware List Small Hex Wrench 1 pc. Hex Wrench 1 pc. M6x35 Head Cap Bolt 16 pcs.
PAGE 2
88 5082 942 Kitchen Island IMPORTANT NOTE. Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List C. Side Panel 2 pcs. B. Rail 2 pcs. D. Leg 2 pcs. G1. Shelf 2 pcs. E. Leg 2 pcs. G2. Shelf 2 pcs. J. Shelf 1 pc. I.
PAGE 3
Assembly Instructions 2/5 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten up all the bolts until each part is properly assembled. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. A STEP 1 Remove the Drawer from Top (A). Cam Lock Screw C Figure 1 STEP 2 Insert Cam Lock Screws into the pre-drilled holes of Side Panels (C) and tighten.
PAGE 4
Assembly Instructions 3/5 STEP 3 Head Cap Bolt L L Attach Rail (L) to Leg (D) and (E) with Head Cap Bolts. (See Figure 3) Attach Shelf (G1) and (G2) to unit at the pre-drilled holes of side panels, then. attach the assembled legs to unit with Head Cap Bolts. E D E D Figure 3 E G2 D G1 G2 D Head Cap Bolt E G1 Head Cap Bolt K STEP 4 Attach Base (K) to unit with Head Cap Bolts.
PAGE 5
Assembly Instructions 4/5 Head Cap Bolt Spring Washer Flat Washer STEP 5 Attach Feet (F) to Base (K) with Flat Washers, Spring Washers and Head Cap Bolts. (See Figure 4) F F F K F Flat Washer Spring Washer Head Cap Bolt Figure 4 Machine Screw Pull Handle Figure 5 STEP 6 Attach Doors (H) and (I) by sliding the door lift hinges into the side panel lift hinges. (See Figure 5) Assemble Pull Handles to Doors (H), (I) and Drawer with Machine Screws. (See Figure 6) Slide Drawer into place.