Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsCarts & Utility TablesNapa Natural Kitchen Cart with Storage

88 5099 95C

Kitchen Center

PART LIST

Casual Attire For Today's Home

Tools Required For Assembly : Phillips screwdriver

Top

1 pc.

Shelf

2 pcs.

Middle Frame

1 pc.

Side Panel

1 pc.

Back Panel

3 pcs.

Side Panel

1 pc.

Front Rail

1 pc.

Door

1 pc.

Door

1 pc.

Drawer

2 pcs.

Side Rack

1 pc.

Side Rack

1 pc.

Brush Chrome Pipes

3 pcs.

Handle Arm

2 pcs.

Base Rack

1 pc.

(Knock-Down Construction, please refer

to the last page of these instructions for

steps to complete assembling drawers)

Base

1 pc.

Middle Frame

1 pc.

Lower Back Stretcher

1 pc.

Upper Back Stretcher

1 pc.

Back Support

2 pcs.

Divider

1 pc.

Round Arm

1 pc.

Shelf

2 pcs.

Drawer

2 pcs.

Caster

with and

without lock

4 pcs.

Head Cap Bolt

30 pcs. (+1Extra)

Hex Wrench

1 pc.

Machine Screw

for Pull Handle

6 pcs.

Adjustable Pin

16 pcs. (+1 Extra)

Wood Plug

7 pcs. (+2 Extra)

Pull Handle

2 pcs.

Pull Handle

2 pcs.

Wood Screw

for Bottom Drawer Part

(Short 6 x ½”)

12 pcs.(+1 Extra)

Wood Screw

for Side Drawer Part

(Long 6 x 1” )

16 pcs.(+1 Extra)

Wood Screw

16 pcs. (+ 1 Extra)

HARDWARE LIST

J1.

Back Post

1 pc.

J2.

Back Post

1 pc.

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Summary of content (5 pages)

PAGE 1
88 5099 95C Kitchen Center IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Casual Attire For Today's Home PART LIST D. Middle Frame 1 pc. A. Top 1 pc. B. Side Panel 1 pc. G. Upper Back Stretcher 1 pc. H.
PAGE 2
Assembly Instructions 2/5 IMPORTANT NOTE Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. A G F Head Cap Bolt STEP 1 Attach the Lower Back Stretcher (H) to the Side Frame (B), using Head Cap Bolts. B F F I J1 H Attach The Back Post (J1),(J2) to the Lower Back Stretcher (H) and slide the Back Panels (F) to place.
PAGE 3
Assembly Instructions 3/5 Wood Screw STEP 3 Attach 4 Casters to the underside of the Base (K), put the 2 Casters with lock in front as you first need to keep the cart firmly in place. (See sticker in the bottom indicating front side) K Locking Caster Head Cap Bolt K STEP 4 Place the Base (K) on the unit. Tighten up all Head Cap Bolts. STEP 5 Turn the assembled unit to back its normal position. Attach the Divider (Q) in the middle.
PAGE 4
Assembly Instructions 4/5 Head Cap Bolt STEP 6 Attach the Side Rack (S) to the Side Panel (B) with Head Cap Bolts. B S Attach the Brush Chrome Pipes(V) and the Base Rack (U) to the pre-drilled holes of the Side Rack (S). U T Attach the Side Rack (T) to the Side Panel (B). V STEP 7 Head Cap Bolt A Place the Top (A) on the unit. Tighten up the Head Cap Bolts.
PAGE 5
Assembly Instructions 5/5 Drawer A P1 P3 (Fig) 1 (Fig)1 P2 Line up Side Parts (O3) and (O4) to the Front Part (O1) and Back Part (O2). Be sure to follow the Arrow sign sticker on the parts. Using a Philips screw driver, insert 1” screws into each of the 4 pre-drilled holes in sides (O3) and (O4), then tighten half way. P4 MAKE SURE ROLLER IS ON THE BACK (Fig) 2 Turn the assembled drawer over and slide the Plywood Bottom Part (O5) into the grooves on Side Parts (O3) and (O4).