Assembly Instructions 2

ManualsBrandsHomestyles ManualsCabinets & ArmoiresHomestyles Cambridge Whitewash Pantry

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

88 5170 692

Carton 88 5170 691 is also needed for assembly.

Side Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Upright

1 pc.

Upright

1 pc.

Back Panel

2 pcs.

Back Panel

2 pcs.

Front Rail

3 pcs.

Stretcher

4 pcs.

Door

2 pcs.

Door

2 pcs.

Knob

7 pcs.

M3x15

Wood Screw

4 pcs. (+1 extra)

M3x30

Wood Screw (long)

6 pcs. (+1 extra)

M3x16

Wood Screw

for stretcher

4 pcs. (+1 extra)

Magnet

2 pcs.

M4x25

Machine Screw

7 pcs.

Adjustable Pin

16 pcs. (+1 extra)

Pantry

Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit

Summary of content (8 pages)

PAGE 1
88 5170 692 Pantry IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List B. Side Panel 1 pc. C. Side Panel 1 pc. D. Side Panel 1 pc. E. Side Panel 1 pc. J. Front Rail 3 pcs. F. Upright 1 pc. K. Stretcher 4 pcs. G. Upright 1 pc. H. Back Panel 2 pcs. O.
PAGE 2
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. The unit must be level to work properly. Use the included adjustable levelers to level. STEP 1 Attach Stretcher (K) to Side Panel (B), then flip the lock. (See Figures 1 and 2) J Attach Back Panels (H), Upright (F) and Stretcher (K) to unit, then flip the lock. H K F K Attach Magnet to Front Rail (J) at the pre-drilled holes with Wood Screws.
PAGE 3
Assembly Instructions 3/7 A STEP 3 Turn unit to its’ upright position. Attach Top (A) to unit, then flip the locks. K J I J K G STEP 4 I Magnet Wood Screw (long) D Attach Stretcher (K) to Side Panel (D), then flip the lock. Attach Back Panels (I), Upright (G) and Stretcher (K) to unit, then flip the lock. Attach Magnet to Front Rail (J) at the pre-drilled holes with Wood Screws. Attach Front Rails (J) to unit with Wood Screws (long).
PAGE 4
Assembly Instructions 4/7 L STEP 6 Attach unit to Base (M), then flip the locks. Attach Top (L) to unit, then flip the locks. M Adjustable Pin STEP 7 N Attach unit from Step 3 to unit from Step 6, then flip the locks. N Insert Adjustable Pins into side panels at the desired level. (See Figure 4) Slide Shelves (N) into position.
PAGE 5
Assembly Instructions 5/7 Drawer (Q) STEP 8 Q4 Attach Drawer Sides (Q3) and (Q4) to Drawer Back (Q2), then flip the locks. (See Figures 5 and 6) Q3 Q2 Lock Roller at back STEP 9 Figure 5 Slide Drawer Bottom (Q5) into the grooves in Drawer Sides (Q3) and (Q4). Q1 Push Drawer Bottom (Q5) all the way into Drawer Back (Q2). Attach Drawer Front (Q1) to unit, then flip the locks. Figure 6 Q4 Q5 Q2 Q3 STEP 10 Attach Knobs with Machine Screws. Part List Q1. Drawer Front 1 pc. Q2. Drawer Back 1 pc.
PAGE 6
Assembly Instructions 6/7 STEP 11 Level unit by adjusting the adjustable levelers on the bottom of unit. (See Figure 7) O P Figure 7 Attach Knobs to Doors (O) and (P) with Machine Screws. (See Figure 8) Attach Doors (O) and (P) to unit by sliding the door lift hinges into the side panel lift hinges. (See Figure 9) Q O Slide Drawer (Q) into place. P Figure 8 Figure 9 Wood Screw for stretcher STEP 12 Insert Wood Screws for stretcher into the pre-drilled holes of stretchers.
PAGE 7
Assembly Instructions 7/7 IMPORTANT To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly. STEP 13 Anchor in wall Place unit at desired location. Bracket on wall Pre-drilled hole at top of unit Wall Screw 3/8” wall hole Wood Screw Drill a 3/8” hole in wall in-line with the pre-drilled hole at top of unit. Move unit. Tie end Insert Anchor into the wall hole and attach Bracket with Wall Screw.
PAGE 8
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.