Assembly Instructions 1

ManualsBrandsHomestyles ManualsBar Stools & Counter StoolsHomestyles Cambridge Whitewash Counter Stool

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

88 5170 89

Bar Stool

Seat

1 pc.

Stretcher

1 pc.

Stretcher

1 pc.

Hex Wrench

1 pc.

Small

Hex Wrench

1 pc.

M8x76

Head Cap Bolt (long)

4 pcs. (+1 extra)

M8x40

Head Cap Bolt (short)

3 pcs. (+1 extra)

M8x50

Head Cap Bolt

4 pcs. (+1 extra)

Flat Washer

11 pcs. (+1 extra)

Spring Washer

11 pcs. (+1 extra)

M3.5x40

Wood Screw

6 pcs. (+1 extra)

Stretcher

1 pc.

Leg

1 pc.

Leg

1 pc.

Back Frame

1 pc.

Summary of content (3 pages)

PAGE 1
88 5170 89 Bar Stool IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List B. Stretcher 1 pc. A. Seat 1 pc. C. Stretcher 1 pc. D. Stretcher 1 pc. E. Leg 1 pc. Hardware List F. Leg 1 pc. G. Back Frame 1 pc. Hex Wrench 1 pc. M3.5x40 Wood Screw 6 pcs.
PAGE 2
Assembly Instructions 2/2 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future. STEP 1 Head Cap Bolt (long) Spring Washer Attach Seat (A) to Back Frame (G) with Flat Washers, Spring Washers, Head Cap Bolts (long) and Head Cap Bolts (short).
PAGE 3
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.