Use and Care Manual

ManualsBrandsHOMESTYLES ManualsFurnitureArts and Crafts Cottage Oak Food Pantry

Part List

Hardware List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Cam Lock Screw

28 pcs.(+1 extra)

88 5180 64

Arts & Crafts Pantry

Flat Washer

4 pcs. (+1 extra)

Hex Wrench

1 pc.

Small

Hex Wrench

1 pc.

Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Knob

4 pcs.

Machine Screw

8 pcs.

Adjustable Pin

16 pcs. (+1 extra)

Wood Screw

for Back Panel

16 pcs. (+1 extra)

Cam Lock

28 pcs.(+1 extra)

Door

1 pc.

Bottom

1 pc.

Top

1 pc.

Side Panel

1 pc.

Door

1 pc.

Back Post

1 pc.

Back Panel

2 pcs.

Front Rail

1 pc.

Leg Frame

1 pc.

Back Rail

4 pcs.

Side Panel

1 pc.

Leg Frame

1 pc.

Shelf

4 pcs.

Top

1 pc.

Front Rail

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Door

1 pc.

Door

1 pc.

Back Panel

2 pcs.

Back Post

1 pc.

Spring Washer

4 pcs. (+1 extra)

Head Cap Bolt

4 pcs. (+1 extra)

Summary of content (5 pages)

PAGE 1
88 5180 64 Arts & Crafts Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 pc. B. Front Rail 1 pc. C. Shelf 4 pcs. F. E. Side Panel Side Panel 1 pc. 1 pc. D. Bottom 1 pc. G.
PAGE 2
Assembly Instructions 2/5 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. * Use a soft cloth between these parts and the floor.
PAGE 3
Assembly Instructions 3/5 Cam Lock B E STEP 2 Attach Back Rail (M) to Side Panel (F) using a Cam Lock. Attach Back Post (J) to Back Rail (M). Slide Back Panels (I) to the unit. Attach Back Rail (M) to unit using a Cam Lock. Attach Front Rail (B) to unit using a Cam Lock. Attach Side Panel (E) to the unit using Cam Locks. (see Figure 2) M I J I F M Head Cap Bolt Spring Washer Flat Washer K D STEP 3 L Attach Leg Frames (K), (L) to the Bottom with Head Cap Bolts, Spring Washers and Flat Washers.
PAGE 4
Assembly Instructions 4/5 Head Cap Bolt O P M U T T Q M STEP 5 Attach Back Rail (M) to Side Panel (Q) using a Cam Lock. Attach Back Post (U) to Back Rail (M). Slide Back Panels (T) to the unit. Attach Back Rail (M) to unit using a Cam Lock. Attach Front Rail (O) to unit using a Cam Lock. Attach Side Panel (P) to the unit using Cam Locks. N STEP 6 Place Top (N) onto unit using Cam Locks. Cam Lock Cam Lock STEP 7 Attach unit from Step 6 to unit from Step 4 using Cam Locks.
PAGE 5
Assembly Instructions 5/5 STEP 8 Insert Adjustable Pins into side panels at desired location. Place Shelves (C) into position. R Attach Doors (G), (H), (R) and (S) to the side panels by sliding the door lift hinges into the side panel lift hinges. (see Figure 4) C S C Assemble Pull Handles to Door (G), (H), (R) and (S) with Machine Screws.