Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsDining Room SetsArts and Crafts 7-Piece Black Rectangular Dining Set

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver, Level

88 5181 31

Dining Table

IMPORTANT

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Top

1 pc.

Top

1 pc.

Leaf

1 pc.

Table Slide

2 pcs.

Leg

4 pcs.

Key Wrench

1 pc.

M8x50

Bolt

8 pcs. (+1 extra)

M3.5x40

Wood Screw

16 pcs. (+1 extra)

Spring Washer

8 pcs. (+1 extra)

Flat Washer

8 pcs. (+1 extra)

Spring Washer (small)

8 pcs. (+1 extra)

Flat Washer (small)

8 pcs. (+1 extra)

M6x45

Head Cap Bolt

8 pcs. (+1 extra)

Summary of content (4 pages)

PAGE 1
88 5181 31 Dining Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. B. Top 1 pc. D. Table Slide 2 pcs. C. Leaf 1 pc. E. Leg 4 pcs. Hardware List Key Wrench 1 pc. Spring Washer (small) 8 pcs. (+1 extra) Flat Washer (small) 8 pcs.
PAGE 2
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future. Head Cap Bolt Spring Washer (small) Flat Washer (small) D D A STEP 1 Place Tops (A) and (B) upside down on a soft cloth.
PAGE 3
Assembly Instructions 3/3 E Bolt Spring Washer E Flat Washer E E Figure 4 STEP 3 Attach Legs (E) to unit with Flat Washers, Spring Washers and Bolts. (See Figure 4) Turn table over to its’ upright position. C Figure 5 STEP 4 Disengage the locks by turning their handles counter-clockwise. (See Figure 5) Pull out both sides of the table, then place Leaf (C) in the unit, aligning the dowels with the holes.
PAGE 4
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.