Assembly Instructions 1

ManualsBrandsHomestyles ManualsDining Room & KitchenHomestyles Sedona Brown Kitchen Island

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver, Level

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Kitchen Island

20 05420 94Q1

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

Cam Lock Screw

23 pcs. (+4 extra)

Cam Lock

23 pcs. (+6 extra)

M6x38

Head Cap Bolt

6 pcs. (+1 extra)

Adjustable Pin

16 pcs. (+1 extra)

M4x32

Machine Screw

5 pcs.

Knob

5 pcs.

M3x25

Wood Screw (long)

24 pcs. (+1 extra)

M3x16

Wood Screw (short)

28 pcs. (+1 extra)

M3.5x19

Wood Screw

9 pcs. (+1 extra)

Magnet

2 pcs.

Patent 8,584,600 B2

Carton 20 05420 94Q2 and 94Q3 are also needed for assembly.

Top

1 pc.

Leaf Top

1 pc.

Summary of content (9 pages)

PAGE 1
20 05420 94Q1 Kitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Patent 8,584,600 B2 Part List A. Top 1 pc. B. Leaf Top 1 pc. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. Cam Lock Screw 23 pcs. (+4 extra) M6x38 Head Cap Bolt 6 pcs.
PAGE 2
Assembly Instructions 2/8 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Make sure unit is level before tightening these screws. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future.
PAGE 3
Assembly Instructions 3/8 STEP 2 Attach Middle Panel (J) to Front Rail (E) and Back Rail (F) with Cam Locks. (See Figure 3) E Attach Base (C) to unit with Cam Locks. J F Cam Lock C Figure 3 Cam Lock STEP 3 Attach unit to Side Panel (H) with Cam Locks and Head Cap Bolts.
PAGE 4
Assembly Instructions 4/8 STEP 4 Attach Back Rail (G) to unit with Cam Lock. Slide Back Panel (L) into position. G L Slide Upright (M) into position. Slide Back Panel (L) into position. M Cam Lock L Cam Lock I STEP 5 N Attach Side Panel (I) to unit with Cam Locks and Head Cap Bolts. Insert Supports (N) into pre-drilled holes in unit, then tighten.
PAGE 5
Assembly Instructions 5/8 STEP 6 Wood Screw Place Top (A) and Leaf Top (B) upside down on a soft cloth. Attach Leaf Top (B) to Top (A) with Wood Screws. (See Figure 5) B A Figure 5 STEP 7 Turn unit from Step 5 to its’ upright position. Attach Dividers (K) to unit with Cam Locks. Attach top unit to unit with Cam Locks. K K Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 6) Note: Unit must be level to proceed.
PAGE 6
Assembly Instructions 6/8 Drawer (Q) Bottom STEP 8 Q3 Q1 Q2 Attach Drawer Front (Q1) and Drawer Back (Q2) to Drawer Side (Q3) with Wood Screws (long). Q4 Attach Drawer Side (Q4) to unit with Wood Screws (long). Wood Screw (long) Roller at back Wood Screw (short) STEP 9 Slide Drawer Bottom (Q5) into groove. Q5 Attach Drawer Bottom (Q5) to unit with Wood Screws (short). Knob STEP 10 Attach Knob with Machine Screw. Machine Screw Part List Q1. Drawer Front 3 pcs. Q2. Drawer Back 3 pcs. Q3.
PAGE 7
Assembly Instructions 7/8 STEP 11 Adjustable Pin Knob Insert Adjustable Pins into side panels and middle panel at desired level. Place Shelves (D) into position. O Attach Doors (O) and (P) to unit by sliding door hinges into side panel hinges. (See Figure 7) D D Attach Knobs to Doors (O) and (P) with Machine Screws. (See Figure 8) D D Figure 7 Q Q P Q Machine Screw Figure 8 STEP 12 Slide Drawers (Q) into position.
PAGE 8
Assembly Instructions 8/8 Top Extension Instructions STEP 13 Lift up leaf top. STEP 14 Holding leaf top up, pull out a back post from unit; then pull out other back post. Note: Unit must be level to work properly.
PAGE 9
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.