20 05502 0403 Queen Bed Rails Ta IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. ~ Part List G. Side Pan! 2 pes. ~ Hardware List © — & 5/33" Waxes Bolt Sou are Washer Nut Wood Sew Wrench LL B pos. (+1 extra} S pos. (+1 extra} 8 pos. (+1 extra) 12 pes. {+1 extra) 1pe.
( Assembly Instructions 2/3 ) IMPORTANT » Lie 3 soft cloth between these parts and the floor. = Do not use power too's above 8 volts to assembler. » Do not tights all the bolts until each part is properly assembled. = The unit must be level to work properly. Use the included adjustable levelers to level. « Keep Wrench as the Nuts may need to be tightened in the future. » Da not slide bed on floor, To move assembled bed requires two people. Remove any bedding, then Ii and carry bed.
( Assembly Instructions 3/3 ) List Square Washer STEP 2 Attach Side Panels (G) to Headboard and Foot board with Square Washers and Nuts. Tighten Nuts with Wrench. {See Figure 1} Attach Stretchers {H} to unit with Wood Screws into per-drilled holes, Note: Do not slide bed on floor. To move assembled bed requires two people. Remove any bedding, then lift and carry bed.
CARE INSTRUCTIONS NEVER NEVER allow liquids to remain on furniture. use glass cleaners on Absorption causes parts to warp finished furniture. Ammonia and split and finishes to laminate. chemically attacks the finish. EB Do not use power tools Do not place Da not write above 8 volts to assemble. in direct sunlight. directly on surface. PREVENT PREVENT PREVENT CRACKING FADING MARKING I Do not place hot objects on surface. PREVENT FINISH DAMAGE Do not use commercial waxes and polishes.
