Ta IMPORTANT 20 05502 0601 King Headboard Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Js bh! Do not use power tools above 8 volts to assemble. u { A Part List A Headboard 1 pe D. Post 1pe 4 oo B. Stretcher 1 pe. 4 Hardware List £55) NN #F e’ Ranch Hex Wrangle Hex Wrench (Small) Cam Lack Screw Cam Lock pe. 1pe pe. 5 pos.
( Assembly Instructions 2/4 ) IMPORTANT » Lie 3 soft cloth between these parts and the floor. = Do not use power too's above 8 volts to assembler. » Do not tighten all the bolts until each part is properly assembled, = Keep Wrench and Hex Wrench as the Nuts and Head Cap Bolts may need 1o be tightened in the future. STEP 1 Insert Bolts into per-drilled holes in Posts {C} and {D}, then tighten. Bolt —— STEP 2 Place Headboard (A) upside down on a soft cloth.
( Assembly Instructions 3/4 ) STEP 3 Attach Stretcher (B) to Headboard (A) with Cam Locks. {See Figure 2} Attach Posts {C) and {D} to Headboard (A) with Dowels, Square Washers and Nuts. Tighten all Nuts with Wrench. {See Figure 3) Nut. Square Washer Cam Lock UT iH § Figure 3 HB.
( Assembly Instructions 4/4 ) STEP 4 Attach Brackets to unit with Head Cap Bolts (short). Tighten Head Cap Bolts {short} with Hex Wrench. {See Figure 4) Attach Corner Plates to unit with Flat Washers, Spring Washers and Head Cap Bolts {ion. Tighten Head Cap Bolts {long} with Hex Wrench. Head Cap Bolt {rhos Head Cap Holt ong) Spring Washer Flat Washer Comer Plate HB.
CARE INSTRUCTIONS NEVER NEVER allow liquids to remain on furniture. use glass cleaners on Absorption causes parts to warp finished furniture. Ammonia and split and finishes to laminate. chemically attacks the finish. EB Do not use power tools Do not place Da not write above 8 volts to assemble. in direct sunlight. directly on surface. PREVENT PREVENT PREVENT CRACKING FADING MARKING I Do not place hot objects on surface. PREVENT FINISH DAMAGE Do not use commercial waxes and polishes.