20 05503 0501 Queen Headboard Ge IMPORTANT Carefully remove all the parts from the carton and place therm individually on a soft cloth to prevent scratches or other damage. Carefully and strictly fol ow these assembly instructions to ensure a completed product as designed. De not use power tools above 8 volts to assemble. r a Part List F. Post 1 pec. Hardware List & Dumdum Méx30 Fiduciary hol Ranch Hax Ranch Small) 1 142" Fiat Head Screw Head Cap Bolt Bait long] Rum frank 1pe. 5 pes. [+1 extra) 4 pes.
( Assembly Instructions 2/4 ) IMPORTANT » Use a soft cloth between these parts and the floor. + Do not use power tools above 8 volts to assemble. » Do not tighten al the bolts unt] each part is properly assembled. # Keep Wrench and Hex Wrench as the Nuts and Head Cap Bots may need to be tightened in the future. STEP 1 [+e Insert Bolts (long) into per-drilled holes in Crown (A), then tighten. Insert Bolts (short) into per-drilled holes in Posts {E} and {F), then tighten.
( Assembly Instructions 3/4 ) STEP 3 Attach Posts (E} and {F) to Headboard (D) with Dowels, Flat Washers, Spring Washers and Nuts. Tighten all Nuts with Wrench. (See Figure 2} Attach Corner Plates to unit with Flat Washers, Spring Washers and Head Cap Bolts, Tighten all Head Cap Bolts with Hex Wrench. (See Figure 3} Head Cap Bot Spring Washer Flat Washer Comer Plate < Flat Washer Spring Washer Head Cap Bolt Fiat Washer Spring Washer Hex Wrench Nut Figure 2 Figure 3 3.
( Assembly Instructions 4/4 ) STEP 4 Attach Crowns {A} and (B} to unit with Flat Washers, Spring Washers and Nuts. Tighten Nuts with Wrench. (See Figure 2} STEP 5 Push Crown {A} firmly to unit and hold in place, Attach 1 1/2" Flat Head Screws to unit. 3.