2005503 0501 King Headboard Ge IMPORTANT Carefully remove all the parts from the carton and place therm individually on a soft cloth to prevent scratches or other damage. Carefully and strictly fol ow these assembly instructions to ensure a completed product as designed. De not use power tools above 8 volts to assemble. r ~ Part List Sr F. Post 1pe. s ~y Hardware List Fo Dumdum Méx30 Fiduciary hol Ranch Hex Rand: Smell) 1 142" Fiat Head Screw Head Cap Bolt Bait long] Rum frank 1pe. & pes. [+1 extra) 4 pos.
( Assembly Instructions 2/4 ) IMPORTANT » Use a soft cloth between these parts and the floor. + Do not use power tools above 8 volts to assemble. » Do not tighten al the bolts unt] each part is properly assembled. # Keep Wrench and Hex Wrench as the Nuts and Head Cap Bots may need to be tightened in the future. Deter I STEP 1 Insert Bolts (long) into per-drilled holes in Crown (A), then tighten. | Insert Bolts (short) into per-drilled holes in Posts {E} and {F), then tighten.
( Assembly Instructions 3/4 ) STEP 3 Attach Posts (E} and {F) to Headboard (D) with Dowels, Flat Washers, Spring Washers and Nuts. Tighten all Nuts with Wrench. (See Figure 2} Attach Corner Plates to unit with Flat Washers, Spring Washers and Head Cap Bolts, Tighten all Head Cap Bolts with Hex Wrench. (See Figure 3} Flat Washer Spring Washer Head Cap Bolt Spring Washer Flat Washer Corner Pate < Flat Washer Spring Washer Head Cap Bolt Fiat Washer Spring Washer Hex Wrench Nut Figure 2 Figure 3 3.
Assembly Instructions 4/4 STEP 4 nit with Flat Washers, Spring Washers and Nuts. Attach Crowns {A} and Tighten Nuts with Wrench. (See Figure unit and hold in place, Attach 1 1/2" Flat Head Screws to unit 3.