WE 20 05506 0078 eg Mirror IMPORTANT Cara fully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. r~ I 5 Part List B. Mirror Support I 2 pes. Hardware List § & M635 = NN & Head Cap Alt Spring Washer Flat Washer Hiss Ranch Hex Wrench (small) 8 pos. {+1 extra) 8 pcs. {+1 extra) 8 pos.
( Assembly Instructions 2/3 ) IMPORTANT = Use a soft cloth between these parts and the floor. = Do not use power tools above 8 volts to assemble. + Do not tighten zl the blats until each part is properly assembled, © Keep Hex Wrench as the bolts may need to be tightened 'n the future. STEP 1 Place Mirror (A) face down on a soft cloth. Attach Mirror Supports (B) to Mirror (A) in horizontal HORIZONTAL or vertical position with Head Cap Bolts, Spring Washers and Flat Washers.
( Assembly Instructions 3/3 ) STEP 2 Attach unit in horizontal or vertical position to Dresser with Head Cap Bolts, Spring Washers and Flat Washers. Tighten bolts with Hex Wrench.