Instructions / Assembly

Assembly Instructions 2/2
IMPORTANT
* Please keep Hex Wrench and Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
A
C
B
D
D
D
D
STEP 2
Turn the unit upside down on the soft cloth.
Attach Legs (D) to the unit with
Flat Washers (large), Spring Washers (large) and Nuts.
STEP 1
Attach Connect Panel (B) to
Post (C) with Flat Washers (large),
Spring Washers (large) and Nuts.
Nut
Spring Washer (large)
Flat Washer (large)
Key Wrench
Nut
Key Wrench
Head Cap Bolt
Spring Washer (small)
Flat Washer (small)
Hex Wrench
STEP 3
Attach nit from Step 2 to Table Top (A) withbase u
Flat Washers (small), Spring Washers (small)
and Head Cap Bolts.
Turn the unit over to its’ upright position.
To level the unit, adjust the adjustable levelers on the bottom of unit. (See Figure 1)
Figure 1
A
Spring Washer (large)
Flat Washer (large)