20 05525 0401 Twin Headboard Ge IMPORTANT Carefully remove all the parts from the carton and place therm individually on a soft cloth to prevent scratches or other damage. Carefully and strictly fol ow these assembly instructions to ensure a completed product as designed. De not use power tools above 8 volts to assemble. r Ny Part List A F Crown Stretcher Post Post 1pe. Headboard = 1pe. \.
( Assembly Instructions 2/4 ) IMPORTANT » Use a soft cloth between these parts and the floor. + Do not use power tools above 8 volts to assemble. » Do not tighten al the bolts unt] each part is properly assembled. # Keep Wrench and Hex Wrench as the Nuts and Head Cap Bots may need to be tightened in the future. STEP 1 Attach Crown (B} to Crown (A) by tightening Locks. {See Figure 1) Figure 1 STEP 2 Insert Bolts into per-drilled holes in Crown {A} and Posts (D}, (E), then tighten.
( Assembly Instructions 3/4 ) STEP 3 Attach Posts (D} and (E) to Headboard (C} with Square Washers and Nuts. Tighten all Nuts with Wrench. (See Figure 2} Attach Stretcher (F) to unit with Flat Washers, Spring Washers and Head Cap Bolts. Tighten Head Cap Bolts with Hex Wrench. (See Figure 3) Fiat Washer Spring Washer Head Cap Bolt | Hem Wraith —| Spring Washer Flat Washer Figure 2 Figure 3 He.
( Assembly Instructions 4/4 ) STEP 4 Attach Crown {A) to unit with Square Washers and Nuts. Tighten Nuts with Wrench. {See Figure 2) 7 a Saussure Washer “Ga Nut STEP 5 Push Crown {A} firmly to Headboard (C} and hold in place. Attach 1 3/4" Round Head Screws to unit. He.