20 05525 0601 Ge IMPORTANT King Headboard Carefully remove all the parts from the carton and place therm individually on a soft cloth to prevent scratches or other damage. Carefully and strictly fol ow these assembly instructions to ensure a completed product as designed. De not use power tools above 8 volts to assemble. 's ~ Part List F. Stretcher Post Post Hardware List Mx30 5/32) [oo Maxima Heed Cap Belt Bolt 13/4" Round Head Screw 5/57 Fiat Head Resew Spring Washer Fiat Washer 4 pes.
( Assembly Instructions 2/4 ) IMPORTANT » Use a soft cloth between these parts and the floor. + Do not use power tools above 8 volts to assemble. » Do not tighten al the bolts unt] each part is properly assembled. # Keep Wrench and Hex Wrench as the Nuts and Head Cap Bots may need to be tightened in the future. STEP 1 Attach Crown (B} to Crown (4) by tightening Locks. {See Figure 1) STEP 2 Insert Bolts into per-drilled holes in Crown {A} and Posts (D}, (E), then tighten.
( Assembly Instructions 3/4 ) STEP 3 Attach Posts (D} and (E) to Headboard (C} with Square Washers and Nuts. Tighten all Nuts with Wrench. (See Figure 2} Attach Stretcher (F) to unit with Flat Washers, Spring Washers and Head Cap Bolts. Tighten all Head Cap Bolts with Hex Wrench.
( Assembly Instructions 4/4 ) STEP 4 Attach Crown {A) to unit with Square Washers and Nuts. Tighten Nuts with Wrench. {See Figure 2) A Stare Washer “Gea Mut 13/4" Round Head Crow STEP 5 Push Crown {A} firmly to Headboard (C} and hold in place. Attach 1 3/4" Round Head Screws to unit.