20 05525 0603 King Bed Rails Sa IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft doth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. ~ Part List H. Side Panel 2 pes. 1 Stretcher 3 pes. i 4. Leg & pes.
( Assembly Instructions 2/3 ) IMPORTANT » Use a soft cloth between these parts and the floor, + Do not use power tools above 8 volts to assemble. » Do not tighten al the bolts unt] each part is properly assembled. = The unit must be level to work properly. Use the included adjustable levelers to level. = Neap Wrench as the Nuts may need to be tightened in the future. » Dio not slide bed on floor, To move assembled bed requires two people.
( Assembly Instructions 3/3 ) Mut or 1 Assemble Side Panels (H) to Headboard and Foot board &) with Square Washers and Nuts. / I Tighten Nuts with Wrench. (See Figure 1) Insert Legs {J} into per-drilled holes in Stretchers (1), then tighten. Attach Stretchers (I) to unit with Wood Screws. Figure 2 Level unit by adjusting the adjustable levelers on bottom of legs. (See Figure 2) Note: Unit must be level to work properly. Note: Do not slide bed on floor. To move assembled bed requires two people.