5530-501 Queen Headboard ben IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. { . 5 Part List Ko A. Headboard 1 pe. c Leg Support Upper Stretcher 2 pes. 1p.
( Assembly Instructions 2/3 ) IMPORTANT = Lie 3 soft cloth between these parts and the floor. = Do not use power tools above 8 volts to assemble, » Do not tighten up all the bolts until each part is properly assembled, ® Keep Hex Wrench as the bolts may need to be tightened in the future. Flat Washer Lott {long} Hax Wrench STEP 1 Attach Legs (B) and (C} to Upper Stretcher {D) and Lower Stretcher (E) with Bolts (long) and Flat Washers. Tighten bolts with Hex Wrench. {See Figure 1) Figure 1 WB. 54582 19.
( Assembly Instructions 3/3 STEP 2 Attach Headboard (A) to unit by attaching Supports (F} to Headboard {A} and unit with Bolts (middies. Attach Brackets to Headboard {A} and unit with Bolts {shoring. Tighten bolts with Hex Wrench, Bracket fr Alt (short) Hex Wrench foes Hix Munich WB. 54582 19.
530-502 ben Queen Foot board IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. { . 5 Part List G. Foot board home styles Customer Service: www.homestylesfurniture.
5530-503 pe poe . Queen Bed Rails IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. { . x Part List kL Stretcher 3 pes, H. . Side Panel Leg 3 pes. Hardware List 5Mé'x3 1/8" © Mdse Belt Squats Washer Nut Wrench Wed Screw 8 pos, (+1 extra} 8 prs. (+1 extra) 8 pes.
( Assembly Instructions 2/3 ) IMPORTANT = Lie 3 soft cloth between these parts and the floor. = Do not use power tools above 8 volts to assemble, » Do not tighten all the screws until each part is properly assembled, © The unit must be level to work properly. Use the included adjustable levelers to level. © Keep Wrench as the Nuts may need to be tightened in the future. * Do not slide bed on floor. To move assembled bed requires two people. Remove any bedding, then Ii and cray bed.
( Assembly Instructions 3/3 ) Sara Washer SE Wrench Attach Side Panels {H)} to Headboard and Foot board with Square Washers and Nuts. Tighten all Nuts with Wrench. {See Figure 1) Insert Legs {J} into per-drilled holes in Stretchers {I} and tighten. Attach Stretchers {I} to unit with Wood Screws into per-drilled holes. Figure 2 Level unit by adjusting the adjustable levelers on bottom of legs. {See Figure 2} Note: Unit must be level to work properly. Note: Do not slide bed on floor.