gg 20 05533 0078 home styles Mirror IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. ( . ) Part List B. Mirror Support 9 2 pes. Hardware List (Méxa0) (Méx30) Spring Washer Flat Washer NN Small Key Ranch Head Cap Bolt (Long) Head Cap Bolt (Short) 8 pcs. (+1 extra) 8 pes.
( Assembly Instructions 2/3 ) IMPORTANT « Use a soft cloth between these parts and the floor. « Do not use power tools above 8 volts to assemble. = Do not tighten all the bolts until each part is properly assembled. « Keep Key Wrench as the bolts may need to be tightened in the future. STEP 1 Place Mirror (A) face down on a soft cloth. Attach Mirror Supports (B) to Mirror {A} in horizontal HORIZONTAL or vertical position with Head Cap Bolts (Short), Spring Washers and Flat Washers.
( Assembly Instructions 3/3 ) STEP 2 Attach unit in horizontal or vertical position to Dresser with Head Cap Bolts (Long), Spring Washers and Flat Washers. Tighten with Key Wrench.
CARE INSTRUCTIONS NEVER NEVER allow liquids 1 remain on furniture, us glass cleaners on Absorption causes parts to warp finished furniture, Ammonia and split and finishes to laminate. chemically attacks the finish. Do not write directly on surface. PREVENT MARKING Do not use power tools above 8 volts to assemble. PREVENT CRACKING 1 Do not page hot objects on surface.